Grade 304L SS Coil Manufacturer, AISI 300 Foil, AISI 400 Foils, Stainless Steel Strip, Stainless Steel 304L Strips Supplier, 304L Stainless Steel Strip, AISI 200 Stainless Steel Coils Exporter, Stainless Steel Coil, 304L Stainless Steel Foils Manufacturer in India.

Ashapura Steel is one of the best companies that make a wide arrangement of flawless steel products. One of their types is stainless steel 304L Strips, Coils, Foils. It has oxidation resistance to a maximum temperature of 1650° F (899° C) continuously without appreciable scaling. The maximum temperature for intermittent exposure is 1500° F (816° C). Since 304L is an extra low-carbon variation of 304 Foils and Coils it can often be used in the “as-welded” condition (without annealing), even in severe corrosive conditions, except for applications specifying stress relief. SS 304L Strip has good welding characteristics and can be welded by all standard methods but attention needs to be paid to avoid weld “hot cracking”. Welding may be followed by annealing to relieve stresses during severe forming or spinning. Its chemical composition is as follows- Carbon: 0.03 max, Chromium: 18.00 – 20.00, Manganese: 2.0 max, Nickel: 8.00 – 12.00, Phosphorus: 0.045 max, Silicon: 1.0 max, Sulphur: 0.03 max, Iron: Balance.

SS WERKSTOFF NR. 1.4306 Strip, Coil Supplier, Stainless Steel 304L Foils, 304L Foils Manufacturer, SS 304L Shim Foil Supplier, AISI 200 Stainless Steel Coil Manufacturer, AISI 300 Stainless Steel Foils Stockist, Coils, Stainless Steel 304L Coils Strips Foils Supplier in Mumbai, India.

Stainless Steel 1.4306 Strip Supplier, 304L Stainless Steel Foil, Stainless Steel Shim Foil, 304L Stainless Coils, Strip, Foils Exporter, AISI 200 SS Foils, Stainless Steel Foil Manufacturer, 304L Stainless Steel Shim Foils Exporter in Mumbai, India

Their forms are available in SS 304L Coil – Strip, Foil, Ribbon, Wire- Profile, Round, Flat, Square. Its mechanical properties at room temperature in annealed condition are: Ultimate Tensile Strength: 70 KSI (485 MPa), Yield Strength: 25 KSI (170 MPa), Elongation: 40%, Hardness: R 88. They can be rolled to various tempers and are resistant to corrosion. It is ductile and can be cold worked by stamping, drawing, bending or forming methods. It cannot be heat treated for hardness. Hardness can only be achieved by cold working.

Its applications have uses for Medical Parts, Surgical Parts, Tubing, Flexible Metal Hose, bellows.

Stainless Steel 304L Strips, Coils, Foils Specification

Thickness : 0.025mm to 4.00 mm

Width : 3.2mm to 1500mm (Slit Edge)

Finish : 2D Cold rolled stainless steel strips annealed & pickled
2B Cold rolled stainless steel strips annealed & skin passed
2R work harden for specific hardness

Hardness : Annealed-pickled(soft), 1/4 hard, 1/2 hard, 3/4 hard & full hard (as rolled)

Weight : 50 kg to 4 M. T.

Coil : 150 mm to 510 mm depending on thickness & width of coil.

Length : In Coil Form

Tolerance in Weight : Max 6.5 kg per mm width of strips depending on required thickness & width of the coil

Specialized In Following Stainless Steel 304L Strip, Foils, Coils

304L Stainless Steel Strip, Coils Equivalent Grades

Chemical Composition of SS 304L Strip, Coil, Foils

Mechanical Property of Stainless Steel UNS S30403 Coils, Foils

SS 304L Strip, Coils, Foils Application & Usage

Types of AISI 200 Stainless Steel Strips